Parts For Kiln: Max-119

Name

Description

Quantity

Price

ST1

(sku: 9002)

PLASTIC FEET FOR KILN STAND

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$11.51

TF3 Relay 30 Amp

(sku: 6355)

Relay, 30 amp, 12 volt coil. The relay sends power to the elements of digital kilns.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$47.75

TF2

(sku: 6770)

TRANSFORMER 120/208/240V(UNIVERSAL)

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$50.72

BR-D-6-3

(sku: BR-D-6-3)

TERMINAL 2 GROOVE BRICK, 6 SIDE, 3" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$26.24

CR19

(sku: CR19)

CORDSET, 20 AMP, 120 VOLT, NEMA 5-20, 6 FOOT

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$43.29

TF49

(sku: 6809-6)

SSP CONTROLLER SENTRY XPRESS CONE 04/2000F

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$402.48

BR-B-6-2.5

(sku: BR-B-6-2.5)

BRC STRAIGHT 2 GROOVE BRICK, 6 SIDE, 2.5" BRICK When ordering bricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$21.52

EL1921181

(sku: EL1921181)

ELEMENT, 1193 S/XPRESS 120V, 13.1 OHM, 2 PER KILN

The element comes pre-stretched and bent at the wallbrick corners for a precise fit. Element connectors are included with each new element.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$51.20

TF51

(sku: 6809-6)

SSP CONTROLLER SENTRY XPRESS CONE 10/2400F

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$402.48

MS1 Porcelain Insulators

(sku: MS1)

MS1 Porcelain Insulators, 1 1/8" long (28.57 mm). 4 per package. The insulators prevent the element from touching the kiln case.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$11.37

MS6 Element Connectors

(sku: MS6)

MS6 Element Connectors, brass, 2 per package. Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$10.52

TF5 Half Amp Fuse

(sku: 6726)

TF5 Half Amp Fuse, AGC, 250V AC. This fuse protects the digital controller. The fuse is mounted in the kiln's control panel (usually on the side of the kiln).

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$5.11

TF9 Fuse Holder for Switch Box of Digital Kilns

(sku: TF9)

Fuse Holder for the kiln's AGC half amp fuse. The fuse holder is built into the kiln control panel (usually located on the side of the kiln).

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$11.37

TF72 Sentry Xpress Control Cable

(sku: 6060-2)

TF72 Sentry Xpress Control Cable

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$21.06

HW4 Small Lid Handle

(sku: 1001)

Lid handle for small kilns, 8 sides or less.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$12.52

HW7 Prop-R-Vent

(sku: HW7)

HW7 fall away Prop-R-Vent kit for top-loading kilns.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$23.03

PY80-4 Thermocouple (PY50)

(sku: 6750-14)

Thermocouple (temperature sensor), K-type, 1/4” diameter, exposed tip 14-gauge complete with ceramic block and lead wires for 2 1/2” - 3” wall kilns. (Order the PY81-4 if you do not need to replace the ceramic block or lead wires.) Our beaded thermocouple with polished tip is rugged and reliable. The thermocouple is made in the U.S. with American-made components to exacting standards. The “special limit” thermocouple wire is certified to be close tolerance.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$89.51

PY81-4 Thermocouple, K-Type, 2.5-3 inch Wall Kilns

(sku: 60179-4)

Thermocouple (temperature sensor), K-type, 1/4” diameter, exposed tip 14-gauge for 2 1/2” - 3” wall kilns (less ceramic block and wires). Our beaded thermocouple with polished tip is rugged and reliable. The thermocouple is made in the U.S. with American-made components to exacting standards. The “special limit” thermocouple wire is certified to be close tolerance.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$63.94

Rolling Stand Replacement Part, 18x18x18 inches

(sku: SKU STD181818-BA)

The replacement stand for your Paragon 7- and 8-sided top-loading kiln has locking casters and a mounting bracket for the Orton Kiln Vent. Move the kiln out of the way when not in use. The deluxe stand is a comfortable 18” high. Assembly required; instructions included. This deluxe stand replaces the discontinued standard kiln stand. 18” square x 18” high. Ships in a 25” x 19” x 8” carton.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$204.58

Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
1-800-876-4328
Fax: 972-222-0646
Contact Us

Home

Support

Products

Copyright © 2024,
Paragon Industries, L.P.

“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
dentistry, laboratory, and glass fusing.
Better Designed Kilns from Paragon Industries!"