DT2-7 Digital Hand-Held Pyrometer, Degrees F
Measure high temperatures with digital accuracy on a modest budget. The DT2-7 digital pyrometer measures kiln temperature for improved firing results. With the DT2-7 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln. Monitor electric pottery firings up to cone 10.
The liquid crystal display is easy to read even in bright daylight. This reliable hand-held pyrometer weighs only 5 ounces and measures in degrees F up to 2372F. Replace the Type-K thermocouple in seconds with a simple plug-in connection. The on-off switch saves battery life. The plastic display case is rated for a room temperature of 32 – 122 degrees F.
The DT2-7 comes with a thermocouple, thermocouple wire, 9 volt battery, carrying case, wall mount screws, stand, and printed instructions. Prop the meter on the metal stand for easy viewing.
The DT2-7 is easy to use. Turn on the switch and insert the thermocouple into the kiln. The DT2-7 is easier to read than analog (needle-indicator) meters.
DT2-7 SPECIFICATIONS
Dimensions: 2 3/4” wide x 4 1/4” high x 1” thick
1/2” liquid crystal display digits
Low power consumption
Measurement range: -50F – 2372F
Environmental operating temperature: 32F – 122F
Degrees F display
Type-K thermocouple with 5’ of wire
Requires 9 volt DC battery
Battery life: 150 – 200 hours of continuous use
Low battery indicator message
Weight: 5 oz.
Warranty: 90 days
Replacement thermocouple: PY-71
$142.03
DT2-9 Digital Hand-Held Pyrometer, Degrees C
Enjoy digital accuracy on a modest budget. The DT2-9 digital pyrometer measures kiln temperature for improved firing results. With the DT2-9 you can fire copper enameling, control the cooling rate of difficult glazes, or know when to begin monitoring glass in a switch-operated kiln.
The liquid crystal display is easy to read even in bright daylight. This reliable hand-held pyrometer weighs only 5 ounces and measures in degrees C up to 1287C. Replace the Type-K thermocouple in seconds with a simple plug-in connection. The on-off switch saves battery life. The plastic display case is rated for a room temperature of 0 – 50 degrees C.
DT2-9 SPECIFICATIONS
Dimensions: 2 3/4” wide x 4 1/4” high x 1” thick
1/2” liquid crystal display digits
Low power consumption
Measurement range: 1287C
Environmental operating temperature: 0C – 50C
Degrees C display
Type-K thermocouple with 5’ of wire
Requires 9 volt DC battery
Battery life: 150 – 200 hours of continuous use
Low battery indicator message
Weight: 5 oz.
Warranty: 90 days
Cost of replacement thermocouple: $26.00
$140.68
PY-71 Thermocouple with Lead Wires and Plug
Thermocouple, K-type, with 5’ lead wires for the DT2-7 pyrometer. 4 1/4” long thermocouple fits into a 1/4” wide hole. Thermocouple flat-pin mini connector fits many meters such as the Fluke 53/54 IIB.
$48.32
on:
