Parts For Kiln: A-82B, Discontinued

Name

Description

Quantity

Price

KS1 Kiln Sitter Tube Assembly

(sku: 4039)

KS1 Dawson Kiln Sitter Tube Assembly for the Paragon A series, 2 1/2" thick wall kilns. The replacement tube assembly may not look exactly the same as the original, because we have changed manufacturers. Do not be concerned; the tube assembly will still fit.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$0.00

ST1

(sku: 9002)

PLASTIC FEET FOR KILN STAND

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$11.51

MS8

(sku: MS8)

PILOT LIGHT with push-on terminals.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$14.09

BR-H-8-2.5

(sku: BR-H-8-2.5)

PLAIN, NO GROOVE HALF BRICK, 8 SIDE, 2.5" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$10.84

BR1082

(sku: BR1082)

BRICK BOTTOM FOR 82,81,88

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$232.55

BP8 Full Formed Steel Base, 8 Sided Kilns

(sku: 3005)

The full-formed steel base for 8-sided kilns. The base is made of long-lasting galvanized steel. It protects the firebrick kiln bottom. Install the steel base by removing the old one and sliding the tabs of the new one up behind the stainless steel case. Then fasten with screws.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$64.23

CR2

(sku: CR2)

Cord Set AS 6-4 50A 240V 6 foot cord with 4-prong plug. 14-50P

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$154.90

ELA82

(sku: ELA82)

ELEMENT A82B,A82,A81B,A8 8 OHMS #4004 SL=165 F=8 PT=4, 4 PER KILN

The element comes pre-stretched and bent at the wallbrick corners for a precise fit. Element connectors are included with each new element.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$61.91

BR-C-8-2.5

(sku: BR-C-8-2.5)

BRC STRAIGHT 3 GROOVE, 8 SIDE, 2.5" BRICK When ordering bricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$21.52

BR-E-8-2.5

(sku: BR-E-8-2.5)

BRC TERMINAL 3 GROOVE BRICK, 8 SIDE, 2.5" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$22.80

BR-F-8-2.5

(sku: BR-F-8-2.5)

BRC PEEPHOLE 3 GROOVE BRICK, 8 SIDE, 2.5" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.

The peephole brick comes undrilled. At the factory we drill peepholes with a large, tapered drill bit. You can improvise, however, by drilling the peephole with a 1/4" bit. Use a hacksaw blade or knife to expand the hole. For final shaping, wrap a piece of sandpaper around the peephole plug and rotate inside the new peephole.

The bottom of the peephole should be horizontal, or parallel to the floor; the top of the peephole should be angled downward. If instead the peephole is drilled straight in, the plug may fall out during firing.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$22.80

BR-G-8-2.5

(sku: BR-G-8-2.5)

BRC KILN SITTER BRICK, 3 GROOVE, 8 SIDE, 2.5" BRICK When ordering firebricks, always specify the Paragon kiln model number, which is listed on the kiln's safety data plate.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$22.80

BR1182B

(sku: BR1182B)

LDC LID ASSY 2.5" A82, S82. The lid comes with a band, but it does not include hardware such as the hinge and handle.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$249.83

Kiln Sitter Cone Supports, KS-2

(sku: KS-2)

Insert the cone supports into the slots in the Kiln Sitter porcelain tube. Package of 2.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$25.83

KN3 Knob for 4 way rotary switch

(sku: 4037)

Knob for 4 way rotary switch (Off, Low, Med, High). Black plastic with white letters.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$12.07

WR20 Wires for SW4

(sku: WR20)

WR20 #14 switch-to-element wires for SW4 (Set of 1 WR14, 2 WR4)

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$15.64

MS1 Porcelain Insulators

(sku: MS1)

MS1 Porcelain Insulators, 1 1/8" long (28.57 mm). 4 per package. The insulators prevent the element from touching the kiln case.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$11.37

MS6 Element Connectors

(sku: MS6)

MS6 Element Connectors, brass, 2 per package. Use new connectors when replacing an element. (Note: Paragon replacement elements come with new connectors.)

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$10.52

MS7 Pilot light with eyelet terminals

(sku: MS7)

MS7 Pilot light with eyelet terminals. This part replaces the pilot light on kilns equipped with the early 4-way rotary switch with ring terminals. Order the MS8 if your switch has push-on terminals.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$14.09

PL2 Peephole Plug Cone Shaped

(sku: 2000)

PL2 Peephole plug, cone shaped. Keep a spare on hand in case you drop one. The plug is essential for kilns equipped with a downdraft vent.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$10.08

Timer Motor

(sku: TIMERMOTOR)

Motor for the Limit Timer on the Dawson Kiln Sitter and the Orton Auto-Cone. 208 - 240 volt, 60 hertz.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$146.37

Release Claw for Kiln Sitter

(sku: RELEASECLAW)

Release Claw for the Dawson Kiln Sitter and the Orton Auto-Cone. Fits all sensing rods. Instructions included.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$27.72

HW4 Small Lid Handle

(sku: 1001)

Lid handle for small kilns, 8 sides or less.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$12.52

HW7 Prop-R-Vent

(sku: HW7)

HW7 fall away Prop-R-Vent kit for top-loading kilns.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$23.03

Rolling Stand Replacement Part, 18x18x12 inches

(sku: SKU STD181812-BA)

The replacement stand for your Paragon 7- and 8-sided top-loading ceramic kiln has locking casters, a mounting bracket for the Orton Kiln Vent, and a greenware drying rack. (Take advantage of the heat that radiates from the kiln. Load greenware onto the lower shelf. Heat from the kiln will dry the ware for the next firing.) Roll the kiln out of the way when not using it. Ships unassembled. Assembly instructions included. This deluxe stand replaces the discontinued standard kiln stand. 18” square x 12” high. Ships in a 20” x 25” x 7” carton.

Help us to make sure we send you the right part and enter the model number and serial number of the kiln for which you need this part:
Model Number:
Serial Number:

$195.53

Paragon Industries, L.P.,
2011 South Town East Blvd.
Mesquite, Texas 75149-1122
1-800-876-4328
Fax: 972-222-0646
Contact Us

Home

Support

Products

Copyright © 2024,
Paragon Industries, L.P.

“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
dentistry, laboratory, and glass fusing.
Better Designed Kilns from Paragon Industries!"