Printer Friendly

XPRESS-E-10A

Bronze Clay China Painting Enameling Glass Fusing Glass Painting Glass Slumping Lost Wax Casting Silver Clay

Paragon Xpress-E-10

The digital Xpress-E-10A fires to 2000°F- ideal for enameling, china painting, glass art and jewelry. The digital Sentry Xpress controller includes temperature hold, making this kiln suitable for silver clay. The 3-key digital controller is in the base. The front control panel is tilted for easy operation of the digital controller. Because this model no longer has the side-mounted switch box, it saves tabletop space.

Unlatch and open the door with one hand; the latch operates so smoothly that delicate copper enameling or silver clay pieces remain undisturbed while opening or closing the door.

The door opens smoothly on a heavy-duty 1/2” hinge shaft. The firebricks store heat for quick temperature recovery after removing a copper enameling piece.

The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.

Features of the Sentry Xpress 3-key Controller on the Paragon Xpress-E-10

Design programs with up to 8 segments (steps) in Ramp-Hold mode.

Fire to a single temperature at a single speed in the simplified Single Segment mode.

Ramp-Hold mode can store 4 programs.

Skip Segment feature in Ramp-Hold mode

Temperature hold

The Sentry Xpress can control both heating and cooling.

Program Review lets you check that the program you are about to fire is correct.

Temperature Display throughout firing and cooling in your choice of °F or °C

Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.

12 Month Warranty

LED Lights show whether you are in program, review, or firing mode.

The heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace. It needs no element pins. Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.

The Xpress-E-10 can now ship by UPS. Enjoy lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely.

Xpress-E-10 Furniture Kit

1 C-7 (7” square x 5/8”) Shelf

4 – 1/2” long 1” wide Square Posts

1 lb. Bag Kiln Wash

Furniture Kit Shipping Weight: 8 lbs.

Thermocouple with “special limit” wire

The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.

Designed for production

Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

Optional colors at no extra charge

Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise. Scroll down to see color samples in the options section.

Have something good to say about the XPRESS-E-10A? Tell Us

Product Videos

Watch & Listen to P005 The Paragon Kiln Factory Firebrick Room (6 min 47 sec)

Watch & Listen to P010 Paragon’s Sentry Xpress 3-Key Controller (2 min 37 sec)

Watch & Listen to D001 Sentry Xpress Ramp-Hold Demonstration (7 min)

Watch & Listen to P001 The Paragon Kiln Factory Sheetmetal Department (3 min 40 sec)

Watch & Listen to P004 The Paragon Kiln Factory Square Kiln Assembly Line (4 min 30 sec)

Watch & Listen to P008 The Paragon Kiln Factory Inspection Station (1 min 50 sec)

Watch & Listen to Interactive Sentry Xpress 3-key Controller Demo

Watch & Listen to D006 (Spanish) Demostracion Para Incrementar y Mantener La Temperatura Con un Control Sentry Xpress de Industrias Paragon (7 min 9 sec)

Watch & Listen to D003 Sentry Xpress 3-Key Controller Advanced Features (5 min 17 sec)

Specifications

Max. Temperature	2000F 1093C
Amps	15
Phase	1
Watts	1800
Nema	5-15R
TUV tested to CSA and UL Standard 499	Y
CE	N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type	Sentry Xpress 4.0 Digital 3-Key
Voltage	120
Hertz	60
Nema Details

Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Kiln Type

Front Loading Square

Sides

Understanding Chamber Measurements

Chamber Volume

0.39 CU.FT.
11.04 litres

Chamber Width

8.50 IN
216 mm

Chamber Depth

9.00 IN
229 mm

Chamber Height

8.75 IN
222 mm

The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size

14.00W x 18.00D x 20.50H Inches
356W x 457D x 521H mm

Ship Size

28.00W x 21.00D x 24.00H Inches
711W x 533D x 610H mm

Ship Weight

74.00 Lbs.
33.57 Kg.

Ship Method & Notations

This Kiln Ships Via UPS/FedEx

Part Number

10211J1BTA * Base Model

Price

$1,397.51

Quantity

This price is subject to change without notice.

Find A Local Paragon Seller

Purchase your Paragon Kiln through one of our authorized resellers / distributors and get local service.

Find A Local Seller Now!

Options Click on the part numbers below to see full descriptions.
	Part Number	Description	Quantity	Price
	Turquoise Paint	At no extra charge, you can order your Paragon kiln in turquoise instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The turquoise kiln shown her		$0.00
	Hot Pink Paint	At no extra charge, you can order your Paragon kiln in bright hot pink instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The hot pink kiln show		$0.00
	Purple Paint	At no extra charge, you can order your Paragon kiln in luxuriant purple instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The purple kiln shown		$0.00
	Berry Paint	At no extra charge, you can order your Paragon kiln in rich berry instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The berry kiln shown here a		$0.00
	Navy Paint	At no extra charge, you can order your Paragon kiln in navy instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The navy kiln shown here also ma		$0.00
	Jade Paint	At no extra charge, you can order your Paragon kiln in jade instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The jade kiln shown here also may		$0.00
	Black Paint	At no extra charge, you can order your Paragon kiln in striking black instead of the standard blue.		$0.00
	FSCaldera and FireFly Furniture Kit	Recommended furniture kit for the Caldera, E-9, E-10, FireFly, and equivalent sized kilns. Included: 1 C-7 (7" square x 5/8") Shelf 4 - 1/2" long, 1" wide Square Posts		$42.80

Accessories

View Accessories For XPRESS-E-10A

Usages

China Painting Kilns

Enameling Kilns

Additional Information

Wiring Diagrams

Manuals
E & Q Instruction and Service Manual (Includes the Q11P)
Sentry Xpress 4.0 3-Key Controller: Single Segment and Ramp-Hold

XPRESS-E-10A Kiln Model/SKU: 10211J1BTA

Home

Privacy Statement

Legal Notice

Paragon's Green Statement

Support

Products

Glass Blower's Crucible Furnace

Pottery/Ceramic and Glass

“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
dentistry, laboratory, and glass fusing.
Better Designed Kilns from Paragon Industries!"