XPRESS-E-14

China Painting Decals Enameling Glass Fusing Glass Painting Glass Slumping Glaze Testing Low-Fire Ceramics

Features

Feature: 14 gauge thermocouple

Feature: frequency of use does not affect warranty

Feature: Optional color at no extra charge

Paragon Xpress-E-14

The Xpress-E-14A fires to 2000°F. Create breathtaking jewelry or small keepsakes in silver clay, enameling, china painting, glass, lost wax casting, or ceramics. Since the kiln opens from the front instead of the top, it is ideal for copper enameling.

Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. This kiln will give you years of creative enjoyment.

The Xpress-E-14A comes with the Sentry Xpress digital controller, which is mounted in the kiln base (instead of a side switch box) to save table space. The front control panel is tilted for easy operation.

The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.

Features of the Sentry Xpress 3-key Controller on the Xpress-E-14A

Design programs with up to 8 segments (steps) in Ramp-Hold mode.

Fire to a single temperature at a single speed in the simplified Single Speed mode.

Ramp-Hold mode can store 4 programs.

Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.

Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.

Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.

Add Hold Time during firing without having to stop the kiln to reprogram.

Control both heating and cooling in Ramp-Hold.

Program Review lets you check the program you are about to fire.

Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.

Temperature display throughout firing and cooling in your choice of °F or °C

Thermocouple Offset adjusts the thermocouple readout.

Set the Delay to turn on the kiln later to suit your schedule.

Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.

12 Month Warranty

LED Lights show whether you are in program, review, or firing mode.

Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review these features in more detail.

A 1/2” hole is stamped into the steel door case and includes a brushed stainless steel cover. We have left the firebrick behind the hole undrilled so that you can drill it to the exact size that you need for a peephole, vent hole, or extra pyrometer hole. (Most people do not need the hole and leave the firebrick undrilled.)

The Xpress-E-14A heating elements, exposed in dropped, recessed insulating firebrick grooves, are easy to replace. The 2 1/2” thick firebricks store plenty of heat for slow cooling through the glass annealing range. For small glass pieces such as jewelry, you can anneal without having to turn the elements back on during cooling. (Extra heat is necessary for annealing large pieces, however.)

Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.

Paragon kilns are built to be dependable. They are loaded with attention to details, such as the costly nickel-plated copper wire with high temperature glass-braided insulation. Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns.

Becky Johnson, a glass teacher in Dallas, Texas, describes opening the kiln: “I like to open the kiln with my students so that we can review and admire each other’s treasures together. The transformation of the glass inside the kiln is magical and mystical. It changes from pieces of arranged cut glass to awe-inspiring art. To be some part of that process is a true gift.”

“Paragon kilns just go on working forever,” said Jeff Zamek, author of “What Every Potter Should Know.” He added, “Paragon kilns have one of the lowest incidences of repair of any kiln manufactured in the U.S.”

Specifications

Max. Temperature	2000F 1093C
Amps	15
Phase	1
Watts	3090
Nema	6-20R
Breaker Size	15
Circuit Wire Size	14 gauge
UL	N
CE	N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type	Sentry Xpress 4.0 Digital 3-Key
Voltage	208
Hertz	60

Kiln Type	Front Loading Square
Sides	4
Understanding Chamber Measurements
Chamber Volume	0.89 CU.FT. 25.20 litres
Chamber Width	13.00 IN 330 mm
Chamber Depth	13.50 IN 343 mm
Chamber Height	8.75 IN 222 mm
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size	18.25W x 22.50D x 20.50H Inches 464W x 572D x 521H mm
Ship Size	29.00W x 29.00D x 29.00H Inches 737W x 737D x 737H mm
Ship Weight	144.00 Lbs. 65.32 Kg.
Ship Method & Notations	This Kiln Ships Via Truck


Part Number	14411J1DTA
Price	$1,913.63

Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Usages

Ceramic Kilns

China Painting Kilns

Enameling Kilns

Other Phases and Voltages

Part Number	Phase	Voltage	Price
14611J1DTA*	1	240	$1,913.63
14411J1DTA	1	208	$1,913.63
Legend: * = Base Model

Paragon Industries

2011 South Town East Blvd.Mesquite, Texas 75149-11221-800-876-4328

XPRESS-E-14

Features

Specifications

Usages

Other Phases and Voltages

2011 South Town East Blvd.
Mesquite, Texas 75149-1122
1-800-876-4328