F120

Glass Bead Annealing    Lamp Working   

Features

Paragon F-120 Lamp Working Kiln

Anneal large glass figurines in the digital F-120 lamp working kiln. Raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod. Lower the door. The punty rod extends outside the firing chamber through the smaller 2” x 8” punty rod door. This allows the glass to anneal safely.

You can make figurines up to 5” tall in the F-120. Maintain the annealing temperature indefinitely with the Sentry Xpress 3-key controller.

Ease of operation will delight you. Never before has lamp work been so easy in this price range. Imagine the massive, award-winning figurines you will make with this kiln.

Conversion stand included with the F-120

The F-120 comes with a heavy-duty Conversion Stand. The Conversion Stand adds a mandrel holder (also called a point rest) to your F-120. Simply place the kiln on top of the Conversion Stand. Then adjust the mandrel holder vertically and horizontally. The holder slides inside steel tubes. The stainless steel mandrel rest includes 7 slots.

Pinless element grooves

The F-120 elements are mounted in pinless grooves in the 3” thick firebrick roof. The element coils are wider than the groove opening, so the elements stay in place without pins. With the element in the top, you can also fuse and slump glass.

Imagine the glass you could sag, slump, and fuse with this kiln. Make small pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics.

Basic kiln features

• Conversion Stand included with the F-120.
• On/off switch for rebooting the controller
• Safety pilot light
• Electrical components stay cool in a slotted base.
• Precisely balanced spring-loaded vertical-drop door
• Rare earth magnets hold the 2” x 8” punty rod door open or closed.
• TUV tested to UL and CSA standards.
• Made in the USA
• Pinless element grooves
• 3” thick insulating refractory firebricks in the roof; 2 1/2” thick firebrick walls and bottom

Made in America

The kiln is made at the Paragon factory in Mesquite, Texas. Our kilns are not merely assembled—they are hand crafted.

Tested by TUV

And for your safety, the F-120 is tested by TUV, Germany’s leading testing lab, to meet UL and CSA standards.

Paragon customer service

We are open from 7 a.m. to 5:30 p.m. Central Standard Time, Monday through Thursday. Our expanded hours allow us to serve customers in differing time zones. Call us—we look forward to hearing from you.

Specifications

Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Usages

Other Phases and Voltages

Copyright © 2024, Paragon Industries, L.P.