|
HT22D |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Heat Treating Industrial |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Features
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Paragon HT-22D Heat Treating FurnaceMachine shops save time with a furnace at their disposal in their own shop. You will no longer send a die out for heat treating, wait for its return and then send it out again for additional heat treating. Solid constructionThe door swings open with one-handed operation. A counter-weight handle holds the door securely closed. The door has a vent hole, so you can see inside the furnace during firing. Metal covers close the vent holes when not in use. (Always wear Paragon firing safety glasses when looking into a hot furnace.) The furnace is insulated with refractory firebrick. The elements are mounted in dropped, recessed grooves machined into the firebrick. The groove protects the element for long life and low maintenance. When necessary you can thread new elements into place following clear instructions in the manual. The firing chamber is protected by a steel case. The door is mounted with a heavy-duty hinge for smooth opening. A safety switch shuts off the power to the elements when the door is opened. We use high temperature wire in the switch box for long life. A heat shield, mounted between the switch box and furnace, helps keep the switch box components cool even during extended operation. To further dissipate heat, the switch box is extra large and generously ventilated. Printed instructionsYour furnace includes a wiring diagram, controller instructions, and heat treating manual. The manual gives you basic heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manual is written in plain English for the beginner. Optional gas injection flow meterDuring heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil. An easier way is to install the gas injection flow meter on your furnace. The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent most scaling. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Specifications
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Usages
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Other Phases and Voltages
|
Copyright © 2024, Paragon Industries, L.P. |