HT14D

Heat Treating Industrial

Features

Feature: 14 gauge thermocouple

Feature: frequency of use does not affect warranty

Feature: Optional color at no extra charge

Paragon HT-14D Heat Treating Furnace

Machine shops save time with a furnace at their disposal in their own shop. You will no longer need to send a die out for heat treating, wait for its return and then send it out again for additional heat treating.

Solid construction

The door swings open with one-handed operation. A counter-weight handle holds the door securely closed. The door has a vent hole, so you can see inside the furnace during firing. Metal covers close the vent holes when not in use. (Always wear Paragon firing safety glasses when looking into a hot furnace.) The furnace is insulated with refractory firebrick. The elements are mounted in dropped, recessed grooves machined into the firebrick. This groove protects the element for long life and low maintenance. Elements are simple to replace. You can thread new elements into place following clear instructions in the manual.

The door is mounted with a heavy-duty hinge for smooth opening. A micro-switch shuts off the power to the elements when the door is opened. We use high temperature wire in the switch box for long life. A heat shield, mounted between the switch box and furnace, helps keep the switch box components cool even during extended operation. To further dissipate heat, the switch box is extra large and generously ventilated.

Printed instructions

Your furnace includes a wiring diagram, programming instructions, and basic heat treating manual. The manual is written in plain English for the beginner.

Optional gas injection flow meter

During heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil. Or you could install the gas injection flow meter on your furnace.

The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent most scaling.

Specifications

Max. Temperature	2000F 1093C
Amps	13
Phase	1
Watts	3120
Nema	6-20R
Breaker Size	20
Circuit Wire Size	14 gauge
UL	N
CE	N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type	Sentry Digital 12-key Non-Ceramic
Voltage	240
Hertz	60

Kiln Type	Front Loading Square
Sides	4
Understanding Chamber Measurements
Chamber Volume	0.89 CU.FT. 25.20 litres
Chamber Width	13.00 IN 330 mm
Chamber Depth	13.50 IN 343 mm
Chamber Height	8.75 IN 222 mm
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size	18.25W x 22.50D x 20.50H Inches 464W x 572D x 521H mm
Ship Size	36.00W x 29.00D x 28.00H Inches 914W x 737D x 711H mm
Ship Weight	146.00 Lbs. 66.23 Kg.
Ship Method & Notations	This Kiln Ships Via Truck


Part Number	HT14D * Base Model
Price	$2,129.58

Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Usages

Heat Treating Ovens

Industrial Furnaces

Other Phases and Voltages

Part Number	Phase	Voltage	Price
HT14D*	1	240	$2,129.58
Legend: * = Base Model

Paragon Industries

2011 South Town East Blvd.Mesquite, Texas 75149-11221-800-876-4328