Printer Friendly

PAF30-1

Glass Annealing

PAF30-1 Annealing Kiln

Expand the production capacity of your glass studio with the massive 28.28-cubic-foot PAF30-1 glass annealing kiln. Make glass vases, bowls, and figurines without worrying about having enough annealing capacity.

The PAF30-1 is designed for annealing, so the maximum temperature is 1100°F (593°C). With this kiln, you are buying only the heating capacity that you need for annealing.

The PAF30-1 is stackable. As your business grows, add another PAF30-1 without using more floor space. The feet of the top kiln fit into the four stacking points of the bottom kiln. Level the kiln in minutes with levelers that are built into the feet.

Spring-loaded quick-release door latches allow one-handed loading into the hot kiln. The doors open smoothly on heavy-duty 3/4” hinge shafts. The firing chamber opening is lined on all four sides with a fiber rope door seal. The doors also each have a seal where the doors meet in the center. Each door has a safety switch that turns off the elements when the door is opened. The controller remains powered and automatically resumes firing when you close the doors.

The kiln heats from the sides and back. Dropped, recessed brick grooves protect the elements for long life. The kiln is heavily insulated for economical operation. The insulating firebricks and fiberboard, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling:

4” thick ceramic fiberboard top

3” thick doors: 3” ceramic fiberboard

4” thick walls: 1” ceramic fiberboard and 3” firebricks

3” thick firebrick bottom

Paragon’s PAF30-1 is made for years of rigorous firing with a heavy 2” tubular steel frame. A heat shield and 1 3/4” air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. Turn off power to the controller when the kiln is not in use using an on/off switch on the control panel.

Thermocouple with “special limit” wire

The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.

Designed for production

Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

Optional colors at no extra charge

Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise. Scroll down to see color samples in the options section.

Have something good to say about the PAF30-1? Tell Us

Product Videos

Watch & Listen to P005 The Paragon Kiln Factory Firebrick Room (6 min 47 sec)

Watch & Listen to P010 Paragon’s Sentry Xpress 3-Key Controller (2 min 37 sec)

Watch & Listen to U005 Safe Installation of the Studio Electric Kiln (3 min 9 sec)

Watch & Listen to P001 The Paragon Kiln Factory Sheetmetal Department (3 min 40 sec)

Watch & Listen to P004 The Paragon Kiln Factory Square Kiln Assembly Line (4 min 30 sec)

Watch & Listen to P008 The Paragon Kiln Factory Inspection Station (1 min 50 sec)

Watch & Listen to Interactive Sentry Xpress 3-key Controller Demo

Watch & Listen to D006 (Spanish) Demostracion Para Incrementar y Mantener La Temperatura Con un Control Sentry Xpress de Industrias Paragon (7 min 9 sec)

Watch & Listen to D003 Sentry Xpress 3-Key Controller Advanced Features (5 min 17 sec)

Specifications

Max. Temperature	1100F 593C
Amps	80
Phase	1
Watts	19200
Nema	Direct
TUV tested to CSA and UL Standard 499	N
CE	N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type	Sentry Xpress 4.0 Digital 3-Key
Voltage	240
Hertz	60
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Kiln Type

Front Loading Square

Sides

Understanding Chamber Measurements

Chamber Volume

28.28 CU.FT.
800.80 litres

Chamber Width

53.50 IN
1359 mm

Chamber Depth

29.00 IN
737 mm

Chamber Height

31.50 IN
800 mm

The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size

74.00W x 50.50D x 45.00H Inches
1880W x 1283D x 1143H mm

Ship Size

76.00W x 55.00D x 51.00H Inches
1930W x 1397D x 1295H mm

Ship Weight

1551.00 Lbs.
703.53 Kg.

Doorway Clearance Needed

50.50 Inches
1282.70 mm

Ship Method & Notations

Important Shipping Information

This Kiln Ships Via Truck

Part Number

PAF30-1 * Base Model

Price

$0.00

Quantity

This price is subject to change without notice.

Find A Local Paragon Seller

Purchase your Paragon Kiln through one of our authorized resellers / distributors and get local service.

Find A Local Seller Now!

Options Click on the part numbers below to see full descriptions.
	Part Number	Description	Quantity	Price
	Berry Paint	At no extra charge, you can order your Paragon kiln in rich berry instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The berry kiln shown here a		$0.00
	Hot Pink Paint	At no extra charge, you can order your Paragon kiln in bright hot pink instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The hot pink kiln show		$0.00
	Jade Paint	At no extra charge, you can order your Paragon kiln in jade instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The jade kiln shown here also may		$0.00
	Navy Paint	At no extra charge, you can order your Paragon kiln in navy instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The navy kiln shown here also ma		$0.00
	Purple Paint	At no extra charge, you can order your Paragon kiln in luxuriant purple instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The purple kiln shown		$0.00
	Turquoise Paint	At no extra charge, you can order your Paragon kiln in turquoise instead of the standard blue or black. Add a splash of color to your shop! (The exact shade of paint may not match the color shown on your computer monitor. The turquoise kiln shown her		$0.00

Accessories

View Accessories For PAF30-1

Usages

Glass Kilns

Additional Information

Options

Replacement Parts

Accessories

Important Shipping Information

Manuals
Sentry Xpress 4.0 3-Key Controller: Single Segment and Ramp-Hold
Sentry Xpress Controller Quick Start Guide

PAF30-1 Kiln Model/SKU: PAF30-1

Home

Privacy Statement

Legal Notice

Paragon's Green Statement

Support

Products

Glass Blower's Crucible Furnace

Pottery/Ceramic and Glass

“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling,
dentistry, laboratory, and glass fusing.
Better Designed Kilns from Paragon Industries!"