|
12/13/2004
Paragon Iguana The Iguana has power to spare. This results in long element life, because the elements do not “struggle” to reach high temperatures. 10,800 watts heat the 18” wide, 18” deep, 22 ½” high interior to a full cone 10. Easy Installation The 240 volt Iguana plugs into a standard 6-50R outlet, so you can fire it on the outlet most studio kilns already use. Easy to Load The Iguana is easy on the back muscles. With the optional 22” stand, the interior floor height is a comfortable 34 ½”. Dropped, recessed grooves seat industrial-gauge elements. The elements are easy to replace, because you can comfortably reach into the kiln. Potters and ceramists who struggle with top-loading kilns will enjoy the Iguana. The door swings open wide on a heavy ½” steel rod with sealed bearings. A spring-loaded latch presses the door tightly closed. A recessed firebrick lip around the door seals in heat. The Sentry digital controller is manufactured by Orton Ceramic Foundation. It is unsurpassed in reliability for a controller in its price range. It includes a programmed cool-down, Cone-Fire and Ramp-Hold modes, and is capable of accepting types K, R, or S thermocouples. A type-K thermocouple with an Inconel® sheath comes standard. For your peace of mind, the Iguana includes a switch that shuts off power to the controller when not in use.
Options - 22” tall stand
- Casters for stand
- Door elements
- Stainless steel finish
- Orton Kiln Mount Vent, which mounts to the back of the kiln. Mounting holes are drilled in every Iguana.
Iguana Features Saves electricity with 3” firebricks Cone 10, 2350°F Type-K thermocouple with ¼” sheath, or optional type-S Sentry 2.0 controller with programmed cool-down Two tapered peepholes in side Available in 200, 208, 220, 240, 480 volts, 1 & 3 phase Proportional power elements for more even heating Heavy-gauge steel completely covers the bottom under the firebricks 1 ½” air gap between the switch box and kiln; electrical components stay cool and last longer Built-in fuse protects the controller Four hand-lifts The Furniture Kit The furniture kit consists of carefully selected fireclay shelves and posts for this particular model. When estimating the price of the kiln, include the cost of furniture. The furniture allows you to stack multiple layers of ware. Without it, you could fire only the ware that would fit on the kiln bottom. Iguana Furniture Kit 3 C-17 full shelves (16” x 14” x 5/8”) 1 C-17H half shelf (8” x 14” x 5/8”) 1” wide square posts, 4 each in lengths of ½”, 1”, 2”, 3”, 4”, 5”, 6” 1 lb. bag kiln wash Furniture Shipping Weight: 50 lb.
|
on:
