FUSION10 with Sentry 12 Key

You can program the Sentry 12-key in seconds; enter the temperatures with a number key pad. Some of the exciting features of this controller:

• Temperature display in bright red throughout firing and cooling in your choice of °F or °C
• Firing Cost: In Options, enter your cost of electricity and the amperage listed on the side of your kiln. After the kiln fires to completion, press the 8 key. The controller will show you the cost of electricity to fire that load.
• Rate: At the factory, we can configure your controller to show rate as degrees of temperature change per hour (the default), degrees of temperature change per minute, or elapsed time needed to reach a temperature.
• Stop/Back Key goes back one step with each key press during programming. Use this feature to correct programming errors.
• Add Time Key adds five minutes to a temperature hold with each key press during firing. Helpful for fusing glass--achieve the exact degree of fusing that you desire.
• Program Review lets you check that the program you are about to fire is correct.
• Audible Temperature Alarm to remind yourself to close a vented lid or to check the kiln near firing completion.
• 30 Month Sentry 12-key Controller Warranty
• Thermocouple Selection: The Sentry 2.0 can operate types K, S or R thermocouples.
• Error Messages report mechanical problems such as a disconnected thermocouple, bad voltage, temperature deviation, etc.
• 14 Segment Display is easier to read than the previous 7 segment.
• Program Safety Lock for the program in active memory. Gives you peace of mind.
• Delay Fire: Set the time that the firing is to start. The kiln will turn on at that time.
• LED Lights show when the relays are powered.
• Quick Release Molex Connectors permit fast removal of the controller. Replacing the Sentry 2.0 or Sentry Xpress takes only minutes.

Sheathed Thermocouple

The thermocouple senses temperature inside the kiln. The Fusion-10 comes with the ¼” Type-K, which is hermetically sealed in a high-nickel metal sheath for long life.

Detailed Instruction Manuals

Included with your kiln is a 28-page controller instruction manual, a quick start programming guide, a 48-page glass manual, and blank firing record sheets. The manuals have been painstakingly researched and are written in plain English, printed in two colors, and are fully illustrated.

Wooden Crate at No Extra Charge

To reduce freight damage, Paragon ships the Fusion-10 in a custom-built, carrier-approved wooden crate rather than the cardboard box that some of our competitors use. Because Paragon is in the central U.S. along a major shipping route, our shipping cost is often lower than that of our competition. We pass this savings on to you.

Paragon Customer Support

When you buy a Paragon kiln, you become a family member of the Texas factory. Call us during business hours, and you will actually hear a live person at the factory. Should you ever need help, we are here long after the sale.

We are open from 7 a.m. to 5:30 p.m. Central Standard Time, Monday through Thursday. Our expanded hours allow us to serve customers in differing time zones. Not only can you phone us directly; we also have a wide network of repair technicians throughout the U.S.

And, of course, Paragon kilns are made in America by skilled workers. Fifty-one percent of them have been with Paragon for over a decade.

	Thermocouple with “special limit” wire The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.
	Kiln Comes with Heavy Duty Rolling Stand, 24” Square x 18” High A deluxe kiln stand with locking casters is included with the kiln. Enjoy the convenience of rolling the kiln out of the way when it is not in use. The 18” tall stand raises the kiln to a convenient height for loading and unloading. Should you need a vent, merely slide the collection cup of an Orton vent into a mounting bracket on the top of the stand. The stand is rock solid. It fits together with interlocking components that assemble with one size of bolt. (Ships unassembled.)
	Designed for production Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
	Optional colors at no extra charge Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise. Scroll down to see color samples in the options section.