 |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F240 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Lamp Working |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Paragon F-240 Lamp Working KilnAnneal large glass figurines in the digital F-240 lamp working kiln. Raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod. Lower the door. The punty rods or mandrels will extend outside the firing chamber through the small punty rod doors. This allows even large glass pieces to anneal safely. Punty rod doors retain the heatTwo 4” x 7 1/2” punty rod doors will give you plenty of room to work with. Because of a gap under the punty rod doors, you can usually close them all the way even when mandrels extend past the firing chamber. Two layers of woven gaskets under each door help to hold in the heat. Powerful rare-earth magnets hold the punty rod doors in the open and closed positions. To help retain heat, the ceramic fiber punty rod doors are 2” thick. Adjustable slide-out mandrel holderWe have added an adjustable mandrel holder to the front of the kiln. Adjust it horizontally and vertically without tools. Position the heavy-duty welded mandrel holder from 1 1/4” to 12” from the front edge of the main floor. (A firebrick extension on the front of the kiln fits under the punty rod doors beyond the front edge of the kiln floor.) Then tighten the mandrel holder with the thumb screws on each side of the kiln. The holder slides inside steel tubes mounted in the base of the kiln. The stainless steel mandrel rest, which includes 14 slots, can also be adjusted vertically. New thicker firebricks in the F-240The firebricks in the roof, walls, door, and bottom are 3” thick. This is 20% more insulation than the standard 2 1/2” firebricks in the walls and bottom of our earlier F-240 kilns. The extra insulation enables the F-240 to maintain a temperature hold with greater ease. A firebrick ledge extends 3” past the punty rod doors as a handy working surface. Safety testingFor your safety the F-240 is rigorously tested by TUV to meet UL and CSA standards. TUV is Germany’s leading testing lab. We can make the F-240 for any electrical system in the world. The F-240 includes a safety on/off switch for your convenience. Electrical components stay cool in a slotted base. Sidewall elements are now standard in the F-240The F-240 elements heat from the sides and back of the kiln in dropped, recessed wall grooves. (This type of groove protects the elements.)
Made in USAThe F-240 is made at the Paragon factory in Mesquite, Texas USA. We are open from 7 a.m. to 5:30 p.m. Central Standard Time, Monday through Thursday. Our expanded hours allow us to serve customers in differing time zones. Call us—we look forward to hearing from you.
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Videos
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Specifications
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Accessories |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Usages
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Additional Information
Sentry Xpress 4.0 3-Key Controller: Single Segment and Ramp-Hold Glass Kiln Instruction & Service Manual |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F240 Kiln Model/SKU: 9F611J3DGP |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
on:
|
“Custom and standard Kilns and Industrial Furnaces for ceramics, pottery, heat treating, enameling, |
||||